Maintenance knowledge Why should the watch be regularly cleaned?

First, the watch seal problem

        Most watches are marked as waterproof, such as 30M, 50M, 100M, etc., of course, some are not waterproof. It is a watch that is marked to be waterproof. It also means that it is waterproof when it is produced, but it cannot guarantee that it will be waterproof for a lifetime without maintenance. Many customers who bought high-end watches wear a table to bathe, and occasionally they feel that there is no water in one or two times. However, after a few times, they found water in the water. They did not process in time, and they began to rust within a long time.
        On the other hand, any watch can't be worn to take a sauna or a hot bath. Because the hot air enters the sealed bag after the gel is shrunk, it can't come out, causing the fog to not be treated in time, causing corrosion and rust. Watch watches can only be worn under normal conditions. In fact, the waterproofing of the watch mainly depends on a small number of rubber rings. The rubber ring will age after a long time. If there is a gap after losing the elasticity, it may cause water ingress and air intake. Therefore, the sealing rubber ring should be replaced regularly to ensure the watch. waterproof.

Second, the mechanical operation problem

        The watches are generally mechanical watches. The mechanical watches are all operated by gears. We see how many diamond watches are marked on the watch. This number of drills does not mean how many diamonds the watch has, but how many gear shafts the watch uses. Bored eyes are generally replaced with synthetic diamonds. Because synthetic diamonds are resistant to wear, the more drilled eyes on the watch, the longer the life of the watch. However, the gear of the watch cannot be processed with hard materials such as diamonds. It can only use steel as the axle. The smaller the watch is, the thinner the axle is. The number of revolutions of tens of thousands of revolutions per day depends entirely on the drill. Oil to reduce wear, once the oil is dry, the axle is dry and worn, and the life of this watch will be reached in a few years.

Although the watch's oil is very high-grade, but because the amount is too small, it will definitely evaporate in a few years, how long can a hair-like wheel axle wear? The previous table structure is not complicated now, and it is done. The larger the wheel, the axle is also relatively thick, so some customers say that my watch has not been maintained for ten years, and now the table is getting smaller and smaller, the price is several times more expensive than before, can not hold the feeling of the previous.

Third, the appearance of maintenance

       The appearance of the watch is generally K gold, K white gold, and high-grade animal leather. Although the main raw material of K gold is gold, the sweat on the hands of people is acidic and the corrosion of the air. The time is not so beautiful when it is new. This requires frequent cleaning and polishing, so that the watch will be kept new. If it is K Platinum, the silver layer is worn out for a long time, and the gold inside is exposed, it is not as white as before, so it needs regular maintenance of whitening to maintain the new. Not to mention the leather strap, the corrosion of sweat stains will cause the belt to harden and crack prematurely, and normal maintenance should avoid wearing a belt watch during sweaty and rainy periods. If the watch is made of steel, it is often polished and refurbished to better reflect its value.

The above three points can be seen that the effect of regular maintenance on the life of the watch, after all, the watch is an absolute luxury jewelry. If damage is caused by poor maintenance, it is not worth the loss, so in daily use, you should not ignore the regular oil maintenance of the watch. In this way, your love watch will always be in the best condition!